[Kernel][8/24] - CleanKERNEL 1.0 -★| CPU OC 1.89 | GPU OC 300/500 | UV | VRALG1 |★-

This is my first kernel ever. Before I even begin to lay out the specs and mods I want to pay thanks to dsb9938 for helping me get my box set up and to sbryan12144 for schooling me on the edits to make. Without their help I would still be looking at an empty Ubuntu desktop wondering where to go!


And away we go....

This kernel is based of the Samsung stock kernel for the Verizon based SGS3. The kernel does not deviate from the stock kernel except as noted below...


Features

• CPU Overclockable to 1.89 GHZ (vs 1.5GHZ stock).
• CPU Underclockable to 192MHZ (vs 384MHZ stock).
• The CPU comes clocked at normal Samsung specs of 384MHZ low and 1.5GHZ high. You will need an application like System Tuner or Set CPU to overlcock it. This can also be modified by advanced users in the init.rc but is not recommended or supported. See first two blocks of init.rc for details.
• GPU Overclocked at 300/500 MHZ
• Under-volted just a few milli-volts to help save battery.
• There are no fancy governors or other such things. Its a modified stock kernel, plain and simple.
• This kernel should be compatible with any VRAGL1 based ROM such as (of course) CleanROM and Nosympathy's stock rooted base. Good chance it will work well with Team Synergy's ROM too but I have not tested that ROM but its a VRALG1 Based ROM.
• If your ROM has non Samsung Boot Animation you will more than likely loose it! This WILL be the case for Synergy ROM!
• This kernel will NOT work with any AOSP, AOKP, CM9, CM10, etc based ROMS! If the ROM is not a based on official Verizon VRAGL1 ROM then dont flash this kernel!

Instructions

• Must have an UNLOCKED BOOTLOADER! No exceptions!
• Should make a complete Nandroid back up before flashing!
• Copy ROM to storage and flash
• Use your favorite CPU controller app to set the speeds.

WARNING!

• Overclocking can permanently ruin your device. I mean totally kill it! You accept this fact upon downloading the kernel and or source!
• I cannot and will not take any responsibility for what this kernel does to your device!
• Not all devices can maintain the same level of overclocking!
• Just because the kernel can clock to 1.89 does not mean YOUR device can!
• Be smart and start off low and bring upt the speed gradually just like O/C'ing a desktop CPU!
• To return to what you had before this... Restore your Nandroid back up! You did make that back up, right?
• Its been said that flashing a kernel can cause IMIE loss. I have not seen it myself but I guess its possible.

Downloads
Kernel HERE
MD5: 4DBE3FF2BD8E6D5B000E74699FFF8862

Source HERE
MD5: 5710470842305B04C4443964EF10D119
** Do a "make clean" before making kernel because I just relaized I didint clean it before uploading!