Permanent MMS Fix for CM10 and AOKP

Permanent MMS Fix for VZW Customers

Prerequisites
A. VZW GS3
B. CM10 or AOKP
C. CDMA WS 2.7 or higher (DONT ASK ME WHERE TO GET IT FIND IT YOURSELF)
D. Common Sense

1. Using Autoprimes Diag Scripts, Enable diag mode Which can be found here :D
2. Using CDMA WS 2.7 or higher (DONT ASK ME WHERE TO GET IT FIND IT YOURSELF)
3. If using 2.7 ur comport needs to be lower than 25, if not then dont worry about it, Connect to Diag port
4. Send the SPC for VZW its 000000
5. Go to the "Other" tab and Press Read under R-UIM
6. Should be set to RUIM Only Change it to NV Only and press write
7. Perform a full device reboot
8. Repeat Step 1
9. Connect back to the Diag port in CDMA WS
10. Send the SPC for VZW its 000000
11. Go to the "NAM" tab and Write ONLY ur MIN and MDN Usually they are the same for VZW
10. Go back to the "Other" tab and read the R-UIM it should say NV Only change it back to RUIM Only
11. Perform another Full device reboot
12. Enjoy not having to do the MMS fix ever again CHEA!!!!!!!