This is an unofficial build of the Android open Collective Project (AoCP) 7.0 based on KitKit 4.4.2 built for the d2vzw. There is no official support for the d2vzw, so after being notifed by some happy d2att users that were using AoCP, I decided to build one for myself.
I am not the dev of this rom, all I did was add in the device and vendor files needed to make it work on d2vzw. This is not a port, everything has been built from source.
As with all things root, I am not responsible for anything that happens while flashing this rom. You take responsibility for your actions. Nandroid is your friend.
----------------------------------
Downloads:
AoCP 7.0 for the d2vzw - Droidhype Roms
GAPPS 4.4.2 - PA 0-Day
Kernel (optional) - BMS
----------------------------------
HOW TO INSTALL
1. Factory Data reset
2. Wipe System/Data/Dalvik/Cache
3. Install ROM zip from Sdcard
4. Install GAPPS zip from Sdcard
5. Reboot to home screen to confirm good flash
6. (Optional) Reboot to recovery and flash kernel
If you run into issues flashing, make sure you are using CWM 6.0.4.3 recovery.
Join the BMS G+ community which will have quicker release info in the future for all things BMS and roms.
Enjoy!
XDA:DevDB Information
AoCP for the d2vzw, a ROM for the Verizon Samsung Galaxy S III
Contributors
GideonX
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Cyanogenmod
Version Information
Status: Beta
Created 2013-12-27
Last Updated 2013-12-27
I am not the dev of this rom, all I did was add in the device and vendor files needed to make it work on d2vzw. This is not a port, everything has been built from source.
As with all things root, I am not responsible for anything that happens while flashing this rom. You take responsibility for your actions. Nandroid is your friend.
----------------------------------
Downloads:
AoCP 7.0 for the d2vzw - Droidhype Roms
GAPPS 4.4.2 - PA 0-Day
Kernel (optional) - BMS
----------------------------------
HOW TO INSTALL
1. Factory Data reset
2. Wipe System/Data/Dalvik/Cache
3. Install ROM zip from Sdcard
4. Install GAPPS zip from Sdcard
5. Reboot to home screen to confirm good flash
6. (Optional) Reboot to recovery and flash kernel
If you run into issues flashing, make sure you are using CWM 6.0.4.3 recovery.
Join the BMS G+ community which will have quicker release info in the future for all things BMS and roms.
Enjoy!
XDA:DevDB Information
AoCP for the d2vzw, a ROM for the Verizon Samsung Galaxy S III
Contributors
GideonX
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: Cyanogenmod
Version Information
Status: Beta
Created 2013-12-27
Last Updated 2013-12-27