This is my first port ever. This is from the Sprint version by @Notorious. I ended up using Lens Flare's guide to port this to the D2VZW (which I found out it's easier than that.) But I gained a lot of knowledge from this. I will try to fix some of the issues if I can. I am still learning all of this. But I am putting this out there as a base ROM to hopefully to get someone with more knowledge to help out.
Working:
4g after using the *#*#4636#*#* code to enable LTE/CDMA PRL
MMS
Bluetooth streaming (Bass is good)
Native WiFi tether
Viper4Audio mod with PowerAmp (Not included, will not work with MIUI player)
Native keyboard swype
Not working:
Front facing camera will reboot the phone (taking pic or messing with the settings)
You have to use the 4636 code to enable 4g after reboot
The CM10.1 kernel that I used starting to heat my phone up. Used the KT kernel if this is the case.
MIUI flashlight - when running from the homescreen, phone starts lagging. Added CM10.1 torch as a workaround. Lockscreen MIUI flashlight is fine.
If you use the modified KT kernel, it seems that overclocking is not working.
Anything else, post it here.
As any ROM you download and flash, I take no responsibility if this causing any damages.
Steps to flash:
1. Download ROM & GAPPS
2. Flash ROM only then reboot
3. Go through the initial setup. Reboot back into the recovery.
4. Flash GAPPS and KT747 kernel for MIUI (Optional). Reboot back to system.
5. Go into the dialer and dial *#*#4636#*#*. Go into Phone Info and select LTE/CDMA to get 4g working.
Update: You may have to have a Xiaomi account to get calls/sms to work. After flashing the ROM, you will need to log into Xiaomi on the phone.
I would like to thank/credit these people:
Notorious for being a big help in answering my questions.
Blackwing and DarkLichyNy
grislieber for porting the KToonz kernel to work with this
KToonsez for his AWESOME kernel - Link to his Kernel Thread
Cyanogenmod
Working:
4g after using the *#*#4636#*#* code to enable LTE/CDMA PRL
MMS
Bluetooth streaming (Bass is good)
Native WiFi tether
Viper4Audio mod with PowerAmp (Not included, will not work with MIUI player)
Native keyboard swype
Not working:
Front facing camera will reboot the phone (taking pic or messing with the settings)
You have to use the 4636 code to enable 4g after reboot
The CM10.1 kernel that I used starting to heat my phone up. Used the KT kernel if this is the case.
MIUI flashlight - when running from the homescreen, phone starts lagging. Added CM10.1 torch as a workaround. Lockscreen MIUI flashlight is fine.
If you use the modified KT kernel, it seems that overclocking is not working.
Anything else, post it here.
As any ROM you download and flash, I take no responsibility if this causing any damages.
Steps to flash:
1. Download ROM & GAPPS
2. Flash ROM only then reboot
3. Go through the initial setup. Reboot back into the recovery.
4. Flash GAPPS and KT747 kernel for MIUI (Optional). Reboot back to system.
5. Go into the dialer and dial *#*#4636#*#*. Go into Phone Info and select LTE/CDMA to get 4g working.
Update: You may have to have a Xiaomi account to get calls/sms to work. After flashing the ROM, you will need to log into Xiaomi on the phone.
I would like to thank/credit these people:
Notorious for being a big help in answering my questions.
Blackwing and DarkLichyNy
grislieber for porting the KToonz kernel to work with this
KToonsez for his AWESOME kernel - Link to his Kernel Thread
Cyanogenmod